Quick-drying adhesive for all lightweight materials, providing an extra strong hold.
Application Detail
Spray nozzle for precise liquid adhesive application, smooth, rough
It can be adjusted in 3 steps to adapt to surfaces such as
Align the arrow on the tip of the spray with the black dot on it.
Apply the adhesive in a thin layer on one surface.
20 30 sec. wait for the glue to dry and stick it.
When you're done, turn the can upside down and spray until no glue comes out of the spray tip.
Always test before new applications.
Product Features
Provides strong adhesion to fabric, wood, metal and plastic.
Felt, foil, photo, textile / fabric, glass, rubber, wood, ceramic, cork materials such as plastic, leather, metal, porcelain, stone can be used to ensure durable adhesion.
Models, design assembly, theater sets, prototypes, lightweight materials, exhibition boards, provide excellent initial adhesion, then easily removed and re-glued.
Storage and Shelf Life
It is flammable.
Liquids form explosive mixtures with air.
Keep away from open flames and heat sources.
Close tightly after use.
Store in a safe place against the risk of fire. min./max. temperature resistance: -40 to +60 °C min. flash point: -41 °C
Attention!
Not suitable for bonding soft PVC and PVC films. When bonding rigid foam/styrofoam, a small area should be tested to check compatibility, depending on the type of foam.
Attention
Harmful to health, irritating to eyes, skin or respiratory organs.
In large quantities it causes death.
Do not inhale, touch or swallow.
Wear protective clothing.
Call a poison control center or doctor immediately.
Lie on your side in the recovery position.
In case of skin irritation or eye contact, rinse with water or a suitable agent.
Colours
Beige
Packaging
650 ml